Testomat Modul TH
Cost Effective Analyzer for Total Hardness
The Testomat® Modul TH is a hardness analyzer that is used to determine and monitor total hardness via titration and photoelectric evaluation. Depending on the reagent, it can cover a range from 0.89 - 448 ppm, see below.
The Testomat® Modul TH sends the measurement result to a PLC via a
4-20mA output signal. Additionally, the measurement results can be saved on a SD-Card. (SD-Card not included)
The Testomat® Modul TH combines the measuring technology of the Testomat® family with a reduced technical design, which lowers cost and maintenance effort.
This analyzer comes without a display, and a PC/Laptop is required for configuration. A display is optional available.
Ideal for monitoring and controlling the water hardness in Boiler Houses, Reverse Osmosis Systems, water treatment applications, food production and drinking-water plants.
MAINS WATER SUPPLY
1 to 8 bar (14.5 to 116 psi) or
0.3 to 1 bar (4.4 to 15.6 psi)
Water inlet: 1/4-in inlet fitting
Water outlet: Hose with 0.47 in. internal diameter
Water temperature: 50 to 104 °F
Power supply: 24 VDC with power-failure protection
Output signal: 0/4 - 20 mA
Protection class: I
Degree of protection: IP 54
Ambient temperature: 50 - 104°F
Dimensions: (W x H x D): 10.6 x 13.8 x 5.8 inch
Weight: 11.7 lb
Reagents for Testomat Modul TH