Back to PRODUCTS

Testomat® EVO TH

Manual Testomat® EVO

Maintenance Testomat® EVO

Flyer Testomat® EVO

Testomat_EVO_frei_web.jpg

The Testomat® EVO TH automatically determines the water hardness by titration. It was developed from the Testomat ECO® and will provide you with a lot of new functions additionally to the approved functions which are: integrated SD card, firmware update via SD card and data transmission via WLAN access point and many more.

Testomat® EVO TH CAL is an enhancement of the Testomat® EVO TH with additional calibration function.

​

​

Application

  • water treatment plants

  • industrial boilers

  • monitoring of process water

  • drinking water plants

​

​

 

certified for USA and Canada (instruments with multi voltage power supply)

MAINS WATER SUPPLY

  • Operating pressure: Depending on product configuration: 1 to 8 bar (15 to 116 psi) or
    0.3 to 1 bar (5 to 15 psi), after removing of the valve body out of the regulator/filter housing

  • Water inlet: Opaque hose with 0.24 in. external diameter/ 0.16 in. internal diameter

  • Water outlet: Hose with 0.24 in. external diameter/ 0.16 in. internal diameter

  • Water temperature: 50 to 104 °F

  • Properties water sample: pH value >4;
    CO    2 value < 20 mg/l

TECHNICAL DATA

  • Power supply: 230 VAC or 100 – 240 VAC ± 10%, 50 - 60 Hz Complete protection T4A including user power supply

  • Power consumption:
    max. 230V (100-240V) / 4A
    without external load 230V (100-240V) / 1A

  • Protection class: I

  • Degree of protection: IP 44

  • Conformity: EN 61326-1, EN 61010-1

  • Ambient temperature: 50 - 104°F

  • Current loop: 0/4 - 20 mA
    Maximum load 500 ohm corresponding to 10V voltage, voltage isolated

  • SD card interface: For SD and SDHC cards up to max. 32GByte, FAT/FAT32 formatting

  • WIFI: Optional with WLAN SD card

  • Dimensions: W x H x D = 14.9 x 18.9 x 11.0 in.

  • Weight: 19.8 lb.

  • The device is power-failure protected

Indicators for Testomat® EVO TH