Limit value measurement that automatically monitors the level of silica in the water. It is ideal for applications such as sterilization of instruments in hospitals.

 

Measuring range
Silica 0.3 – 1.2 ppm

MAINS WATER SUPPLY

• Operating pressure: Depending on product configuration: 0.3 to 1 bar / 4.4 to 14.5 psi ; 1 to 4 bar / 14.5 to 58 psi
  (a pressure reducer (special accessory) should be used from 4 to 8 bar / 58 to 116 psi range)

• Water inlet: Opaque hose with 0.24 in. external diameter/ 0.16 in. internal diameter

• Water outlet: Hose with 0.24 in. external diameter/ 0.16 in. internal diameter

• Water temperature: 50 to 104 °F

TECHNICAL DATA

• Power supply: Depending on product configuration: 24V / 115V / 230V, 50 – 60 Hz

• Instrument protection: 230 – 240 V: T0.1 A; 115 V: T0.2 A; 24 V: T0.8 A

• Main protection for consumers: max. 4 A (N , L)

• Power consumption: max. 16 VA, without external load

• Protection class: I

• Degree of protection: IP 54

• Conformity: EN 61000-6-2, EN 61000-6-4, EN 61010-1

• Ambient temperature: 50 - 104°F

• Current interface: Output of defined values (5, 8, 11, 14, 17, 20 mA) for displaying status and error messages, max. load 500 Ohms

• Contact load relay: 230V / 4A AC ohm resistive load

• Dimensions: W x H x D = 14.3 x 12.4 x 5.4 in.
  with side pocket: 17.4 x 12.4 x 5.4 in.

• Weight: 9.59 lb.