Testomat 808

808_edited.png

Online Analyzer for Limit Value Detection 

The Testomat® 808 is a online limit value measuring instrument which automatically monitors total hardness in water 24-hours a day and reacts immediately to the smallest deviations. 
 

Analyses are performed in an automatic interval mode, while the interval pause can be set from 1-60 minutes according to your specific needs. Additional analyses can be started manually on the device itself or remotely via external control.

 

The online analyzer Testomat® 808 indicates through an alarm that the water hardness has exceeded the pre set limit by the used reagent (see below). Analysis results and stats can be sent to a control room via an analog interface. Alternatively, the Testomat® 808 is able to send a signal to a PLC, or directly to a desalination plant or a filter, so that the deviations in water quality will be automatically corrected.

The 72 hours monitoring mode (BOB-operation) allows for a secure non-stop surveillance on the weekends or during holidays. The Testomat® 808 calculates in advance, whether there is still enough reagent available for the remaining time period.

 

Testomat® 808 can be used in many application where water hardness monitoring is needed:
• Electroplating
• Boiler Houses
• Reverse Osmosis Systems
• Industrial Laundries
• Commercial kitchens and many more

WATER SUPPLY
  • Operating pressure: 4.4 - 58 psi (option to add a pressure reducer for pressure over 58)

  • Water inlet: 1/4-in inlet fitting

  • Water outlet: Opaque hose with an internal diameter of 0.55 inch

  • Water temperature: 50 to 104 °F (a cooler can be installed for temperatures above 104°F)

TECHNICAL DATA
  • Power supply: 24 / 115 / 230 VAC, 50 – 60 Hz

  • Power consumption: Max. 16 V without external load

  • Protection class: I

  • Degree of protection: IP 44

  • Ambient temperature: 50 - 104°F

  • Dimensions: (W x H x D): 14.3 x 12.4 x 5.4 inch

  • Weight: 9.59 lb

Reagents for Testomat 808

Download Section